Teeth removal and Crowns in Penrith
DENTALATION OF TEETH IN PENRITH
Tooth removal is the removal of the neurovascular bundle, in other words, the nerve of the tooth (pulp).
There are 2 methods for tooth removal. The first, instant - when the pulp is removed in one visit. The second, longer, when the removal of the pulp occurs through the application of arsenic. All these manipulations are carried out for the sake of one thing - preservation of the tooth.
The main indications for tooth removal:
* Before preparing for prosthetics;
* Acute and purulent pulpitis;
* Deep and neglected caries;
* Periodontitis.
* Depulpation of a tooth before prosthetics.
If you decide on prosthetics and the dentist advises you to prepare your teeth (to depulpate), do not be surprised, this is a very important procedure. So that in the future there would not be such a complication as pulpitis, for this we carry out the described procedure.
There are drawbacks to tooth removal: a tooth loses its original properties and begins to decay over time. That is why dentists are starting to argue about whether depulpation is needed or not? The fact is that each case is unique and depends on many such important factors as: patient's age, indications, choice of orthopedic design by a doctor. The cost of tooth removal in Penrith can be found by phone. +61 2 4721 1211. "Dentures Penrith". We are always glad to see you!
DENTAL CROWNS IN PENRITH
How are crowns made and from what material are they made? This question is of concern to many of our readers, so this article will describe in detail how crowns on teeth are made.
First of all, it should be understood that crowns can be made of various materials, for example, porcelain, metals or their alloys (including steel and gold), composite or acrylic polymers, as well as combinations of the above materials.
Dentist Penrith, before making crowns, choose the most suitable types of crowns and materials for their manufacture. Moreover, they first of all reveal specific medical indications as to any other method of treatment. In addition, the functional properties that a single crown will have after its manufacture and installation to the patient, the appearance of this crown, the properties and condition of the teeth, the mucous membrane of the mouth and the client’s bite, as well as the presence of any other diseases, must be taken into account, in particular problems with the digestive system.
If required, the doctor removes the dental plaque. If you ask your doctor about how crowns are made, he will tell you the following. In the manufacture of the crown, factors such as the condition of the gum tissue, the location of the teeth, the features of the smile and closing (bite) of the teeth, as well as the color of the teeth located next to the tooth on which the crown is placed, are taken into account, since the shape and color of the installed crown should be in harmony as much as possible with adjacent teeth.
The doctor, making a decision on prosthetics of the patient’s teeth with crowns, will examine his teeth, check whether there are radicular cysts of the jaw, conduct tests for tooth viability and an X-ray examination (if necessary), make a diagnostic model, and carefully examine the general health of the patient and properties of his teeth.
Such a comprehensive examination must be carried out for the following two reasons:
- Perform preliminary treatment (filling, hygiene, gum treatment, root canal therapy, etc.).
- Choose the most optimal type and material of the crown. Grinding (preparation) of the teeth, which are planned to put on crowns in the future, is carried out after completion of the required preliminary treatment.
After preparation, an impression is made not only of the prepared tooth, but also of the opposing and surrounding teeth. Based on the obtained cast, a model of future prostheses is made in the dental laboratory. When the permanent crowns are ready, they are fitting, fitting and fitting (installation).
